Measures For Preparation; Unpacking; Transporting And Lifting; Storage - Samson 6111 Mounting And Operating Instructions

Measures for preparation

4 Measures for preparation
After receiving the shipment, proceed as fol-
lows:
1. Check the scope of delivery. Compare
the shipment received against the deliv-
ery note.
2. Check the shipment for transportation
damage. Report any damage to
SAMSON and the forwarding agent
(refer to delivery note).

4.1 Unpacking

Î Do not remove the packaging until im-
mediately before installation.
Î Dispose of the packaging in accordance
with the valid regulations.

4.2 Transporting and lifting

Transport instructions
− Protect the device against external influ-
ences (e.g. impact).
− Protect the device against moisture and
dirt.
− Observe the permissible ambient tem-
peratures (see section 3.2).
22

4.3 Storage

NOTICE
!
Risk of device damage due to improper stor-
age.
− Observe storage instructions.
− Contact SAMSON in case of different stor-
age conditions.
Storage instructions
− Protect the device against external influ-
ences (e.g. impact).
− Protect the device against moisture and
dirt. Store it at a relative humidity of less
than 75 %. In damp spaces, prevent con-
densation. If necessary, use a drying
agent or heating.
− Make sure that the ambient air is free of
acids or other corrosive media.
− Observe the permissible ambient tem-
peratures (see section 3.2).
− Do not place any objects on the device.

4.4 Preparation for installation

Î Check the device for damage.
Î Check the connections to make sure they
are clean.
EB 6111 EN