Samson 611 Mounting And Operating Instructions page 17

Dynamic response
Limiting frequency
Phase shift
Variable position
Ambient conditions, degree of protection, compliance and weights
Storage temperature
Ambient temperature
11)
With Type 6109
With Type 6112
Degree of protection
Compliance
Explosion protection
ATEX, IECEx, ...
Materials
Enclosure
Cable gland (standard)
Weight
Details (including electric specifications and installation instructions) in section 10.2 (EC type examination certifi-
1)
cate)
Measured with average output pressure
2)
Measured with 2 m hose with 4 mm inside diameter
3)
Observe recommended mounting position.
4)
See section 3.1 when combined with a positioner
5)
Devices without explosion protection
6)
Special versions down to –45 °C available on request
7)
Possible by using accessories
8)
The maximum possible output pressure is 8 bar.
9)
Initial value raised up to 3.0 bar (special version)
10)
Metal cable glands and vent plugs are required for temperatures below –20 °C.
11)
Devices with type of protection "Flameproof enclosure" are delivered without cable gland.
12)
Dimensions
The dimensions for the i/p converters are included on the next pages.
EB 6116 EN
Max. 3.5 % depending on attachment: ±1 % in horizontal position (Type 6109)
Max. 1 % depending on attachment: ±0.3 % in horizontal position (Type 6112)
Black polyamide (6 to 12 mm clamping range, –20 to +80 °C)
12)
5.3 Hz
–130°
–45 to +80 °C
–30 to +70 °C ; –30 to +60 °C
6)
–40 to +70 °C ; –40 to +60 °C
6) 7)
IP 54 , IP 65
4)
Refer to Table 1
Die-cast aluminum, chromated and plastic coated
0.85 kg
Design and principle of operation
1)
1) 7)
, NEMA 4
8)
·
17