2. Basic Copying
Copying from the Wide Large Capacity Tray
The Wide LCT allows you to copy non-standard paper.
Use those trays to copy onto adhesive labels, thick paper such as envelopes, and tab stock.
2
• Special paper such as envelopes, adhesive labels, and coated paper must be loaded in the Wide
LCT. Specify the paper type in Tray Paper Settings in advance. For details, see "Changing Tray
Paper Settings", Paper Settings Reference
• For the procedure for loading paper in the Wide LCT, see "Changing the Paper Size in the Wide
Large Capacity Tray", About This Machine
• If you select Paper Weight 5 to 7, Coated: Glossy, Coated: Matted, or Label Paper in Tray Paper
Settings, air is blown out automatically to fan the paper loaded in the Wide LCT.
Copying onto Tab Stock from the Wide Large Capacity Tray
When copying onto tab stock, specify the type and size of paper under Tray Paper Settings.
• When setting tab stock, always use the tab fence. For details about the tab fence, see "Loading
Paper into the Wide Large Capacity Tray", About This Machine
• Before using this function, set the position of the index tab before copying. For details, see p.54
"Copying onto Tab Stock".
1.
Select the Wide LCT.
2.
Place the originals, and then press the [Start] key.
Copying onto Envelopes from the Wide Large Capacity Tray
When copying onto envelopes, specify the type and size of paper under Tray Paper Settings.
To load envelopes in the Wide LCT, place them with the side you want to copy face-up. Be sure to
unfold the flaps and position them opposite to the paper feed direction.
68
.
.
.