You can adjust the stamp position for back side in duplex mode, within the available range as
shown below.
Top-Bottom: Top 17.0 inches Bottom 17.0 inches
Left-Right: Left 17.0 inches Right 17.0 inches
Superimpose
You can have page numbers printed in white when they overlap black parts of the image.
Default: [Off]
Stamp Color
Sets the priority of the colors selected for the page numbers.
Default: [Black]
Page Numbering Initial Letter
You can select the page numbering initial letter between "P1,P2.../P.1,P.2..." and "S1,S2.../S.1,S.
2...".
Default: [P1,P2.../P.1,P.2...]
Stamp Text
This section describes the user tools in the Stamp Text menu under Stamp.
Font
You can select the font in stamp text mode.
Default: [Font 1]
Size
You can set the stamp text size.
Default: [Auto]
Superimpose
You can have the stamp text printed in white when it overlaps black parts of the image.
Default: [Off]
Stamp Color
Sets the selected priority color when printing the text.
Default: [Black]
Stamp Setting
Specify how stamp text is printed.
• Stamp Position
Specify where to print the Stamp Text.
Stamp
6
267