Combined Copying; One-Sided Combine - Ricoh Pro C751EX Operating Instructions Manual

Combined Copying

This section describes how to make combined copies.
• When placing originals on the exposure glass, start with the first page to be copied. When placing
originals in the ADF, set the first page on top.
• When placing originals on the exposure glass or in the ADF using the Batch function, press the [ ]
key after all the originals have been scanned.
• If you selected [2 Sided] for Original or [Combine 2 Sides] for Copy, you can change the
orientation. See p.80 "Originals and Copy Orientation".
• You can change the initial settings for Combine under Edit in User Tools. For details, see p.257
"Edit".
• In this mode, the machine selects the reproduction ratio automatically. This reproduction ratio
depends on copy paper sizes and the number of originals.
• The machine selects reproduction ratios of between 25 400%.
• If the calculated ratio is under the minimum ratio, it is automatically adjusted to within available
range. However, with some ratios, parts of the image might not be copied.
• You cannot use custom size paper.
• If the orientation of originals is different from that of the copy paper, the machine will automatically
rotate the image by 90 degrees to make copies properly.
• If the number of originals placed is less than the number specified for combining, the last page
segment is left blank as shown.

One-Sided Combine

Combine several pages onto one side of a sheet.
There are six types of One-Sided Combine.
1 Sided 2 Pages Combine 1 Side
Copies two 1-sided originals to one side of a sheet.
BZH165
Combined Copying
2
81