Selecting Copy Paper
Select paper you want to copy onto.
There are two ways to select copy paper:
Auto Paper Select
The machine selects a suitable size of copy paper automatically based on the detected original
size and the reproduction ratio you select.
Manual Paper Select
Select the tray containing the paper you want to copy onto: a paper tray, the multi bypass tray
(tray 6) or the Wide LCT.
See the following table for original sizes and orientations that can be used with Auto Paper Select (when
copying at a ratio of 100%):
Original location
Exposure glass
ADF
• Only the trays that satisfy all the following conditions can be selected in Auto Paper Select mode.
For details, see "Changing Tray Paper Settings", Paper Settings Reference
• [Plain Paper] or [Recycled Paper] is selected in Paper Type under Tray Paper Settings
• Paper Weight 2 or Paper Weight 3 is selected in Paper Weight under Tray Paper Settings
• [Yes] is selected in Apply Auto Paper Select under Tray Paper Settings
Auto Paper Select
The machine selects a suitable size of copy paper automatically based on the detected original size and
the reproduction ratio you select.
1.
Make sure that [Auto Paper Select] is selected.
Trays with a key mark ( ) will not be automatically selected.
Original size and orientation
1
11 × 17 , 8
/
× 14 , 8
2
A3 , A4
, 11 × 17 , 8
1
× 8
/
, 10 × 14 , 7
2
Selecting Copy Paper
1
/
× 11
2
1
1
/
× 14 , 8
/
× 11
2
2
1
1
/
× 10
/
4
2
.
4
1
, 5
/
2
149