Loading Paper Into The Wide Large Capacity Tray - Ricoh Pro C5110 Series Manual

Loading Paper into the Wide Large Capacity
Tray
• Check that the paper edges are aligned with the left side.
1. Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
2. Load paper into the paper tray with print side up.
Do not stack paper over the limit mark.
3. Carefully push the paper tray fully in.
• If you select Paper Weight 6 to 8, [Coated: Glossy], [Coated: Matted], [Label Paper], or [OHP
(Transparency)] in [Tray Paper Settings], air is blown out automatically to fan the paper loaded in
the wide LCT. Fan this paper before loading it. For details, see page 103 "Fanning the Paper".
• Various sizes of paper can be loaded in the wide LCT by adjusting the positions of side fences and
end fence. For details, see "Changing the Paper Size in the Wide Large Capacity Tray", Paper
Specifications and Adding Paper

Loading Paper into the Wide Large Capacity Tray

CVA026
CVA027
.
115