Placing Originals In The Auto Document Feeder - Ricoh Pro C751EX Operating Instructions Manual

• When you place a thick book or three-dimensional original on the exposure glass and lower the
ADF, the back side of the ADF rises up to accommodate the original. Keep your hands away from
the hinges at the back of the ADF when you close it.
• You can specify the way in which copies are delivered when copying an original placed on the
exposure glass under Copy Eject Face Method in Glass Mode in User Tools. For details, see p.
269 "Input / Output".
• When the Sort, Combine, or 1 Sided
originals have been scanned.

Placing Originals in the Auto Document Feeder

Be sure not to block the sensor or load the original untidily. Doing so may cause the machine to detect
the size of the original incorrectly or display a paper misfeed message. Also, be sure not to place
originals or other objects on the top cover. Doing so may cause a malfunction.
Settings should be made in the following situations:
When placing originals consisting of more than 100 pages:
See p.40 "Batch Mode".
When placing originals one by one:
See p.41 "SADF Mode".
When copying originals of various sizes:
See p.42 "Mixed Sizes Mode".
When placing custom size originals:
See p.44 "Custom sizes".
1. Adjust the document guide to the original size.
2. Set the aligned originals face up into the ADF.
Do not stack originals beyond the limit mark.
CDH004
2 Sided function has been set, press the [ ] key after all
Placing Originals
1
39