Ricoh Pro C751EX Operating Instructions Manual page 132

3. Color Copying
2. Press [Edit / Color].
3
3. Press [Color], and then press [Erase Color].
4. Select the color to be erased.
Up to four colors can be erased at the same time.
5. After selecting all colors to be erased, press [OK] twice.
6. Place the originals, and then press the [Start] key.
• The width of the color to be erased can be adjusted in five levels. When the width of the color is set
to [Wider] under Color Sensitivity in User Tools and red has been specified, colors close to orange
and purple will be erased. You can change the setting. For details about Color Sensitivity, see p.
273 "Adjust Color Image".
• To cancel the selection, press the selected (highlighted) key.
• When the Full Color is selected, the full color counter will advance by "1". When the Black &
White is selected, the mono-color counter will advance by "1".
• For examples of what you can do with the color functions, see p.11 "What You Can Do with This
Machine <Color Functions/Color Adjustments>".
130