• Folded copies that are delivered to the multi-folding unit tray might be stacked with their folds open.
If this happens, the position of the folds is unaffected and the copies will still be output in order.
Stacked copies can be easily separated in the order they are delivered. To prevent their folded
sections overlapping, configure the machine to deliver folded copies to the finisher upper tray or
finisher shift tray.
• Remove the Z-fold support tray when delivering copies to the finisher shift tray or the multi-folding
unit tray without using the Z-fold function. If you leave the Z-fold support tray in place, prints are
not stacked properly.
Half Fold
Applies a single, central fold to create two equal panels.
1.
Press [Output/ Customize Function/ Finisher].
2.
Press [Fold].
CDH017
Finishing
2
105