Ricoh Pro C751EX Operating Instructions Manual page 105

*1 The above table shows Z-fold positions. The orientation of the paper does not indicate orientation of
delivery.
1. Press [Output/ Customize Function/ Finisher].
2. Press [Fold].
3. Select the folding direction, and then press [OK].
4. Place the originals, and then press the [Start] key.
• You can specify the fold-back position in 1 mm (0.04 inches) increments under Z-fold Position in
User Tools. For details about Z-fold Position, see "System Settings", Network and System Settings
Reference .
• For details about the number of Z-folded copies that can be stacked on the finisher trays, see
"Specifications for Finisher SR5030 (Optional)" or "Specifications for Booklet Finisher SR5040
(Optional)", About This Machine
• Depending on the Z-fold settings, you may not be able to use Rotate Copy.
• Even if you place different size originals in the ADF, appropriate size of copy paper can be
automatically selected and Z-folded using the Mixed Sizes mode and Auto Paper Select function.
Load the paper you want to use in the paper trays beforehand.
• Paper sizes that can be Z-folded when using the Mixed Sizes mode are as follows (the larger
size paper is Z-folded):
A3 and A4
.
Finishing
2
103