Reverse Ejection - Ricoh Pro C751EX Operating Instructions Manual

2. Remove the originals that were being copied.
3. Place the originals you want to copy.
4. Press the [Start] key.
5. When copying is complete, remove the originals and copies.
6. Press the [Interrupt] key again.
The interrupt key indicator goes off.
7. Place the originals that you copied before, and then press the [Start] key.
Following the instructions on the display.
• The previous copy job settings are restored. Simply press the [Start] key to continue copying from
where it left off.

Reverse Ejection

Copies are delivered in opposite order to the default order setting.
1 Sided originals
1 2
BZH052
Basic Procedure
2
49