INSYS 56k small INT 2.0 Operating Manual page 69

INSYS Modem 56k small INT 2.0/USB 1.0
Command
AT&Z<n>
<Pause> +++
<Pause>
<Pause> ****
<Pause>
June 06
Description
Save phone numbers
The command saves four entries permanently in the EEPROM. Each entry may consist
of up to 35 characters. The entries may be overwritten and must comply with the dial-
ing string as described in the ATD command.
AT&Z<n>=xxx n
xxx
Layout of the alarm functions and security callback:
AT&Z0=xxx Number of the modem or fax for a simple alarm message
Service center number of the GSM provider for SMS access
AT&Z1=xxx Enter the callback number for security callback
AT&Z2=xxx Number of the mobile phone for simple alarm messages
AT&Z3=xxx Number of the fax machine for collective alarm messages
Change from data mode to command mode (online command mode).
1 second pause before and after the entry, no <CR>. After the response OK, an addi-
tional waiting period of 1 second for the re-entering of AT commands must be ob-
served.
Start of the remote configuration at the local modem
After the 4 escape characters **** were entered at the local modem (1 second pause
before and after the entry, no return - <CR> -), the remote configuration at the remote
terminal is activated. After the response OK, an additional waiting period of 2 seconds
for the re-entering of AT commands must be observed.
This is the number of the list entry (from 0 to 3).
This is the dialing string with the phone number.
AT Command Set
69