Terminal Program - INSYS 56k small INT 2.0 Operating Manual

Hide thumbs Also See for 56k small INT 2.0:

Table of Contents

Firmware Update

Close the window when the update is completed.

8.2 Terminal Program

8.2.1

Requirements

For the firmware update, you will need a PC and a termi-

nal program. The terminal program must be able to per-

form an ASCII upload (ASCII data transmission protocol).

Setting the hardware flow control is mandatory. For safety

reasons, any interpretation of characters (e.g.: TAB, CR,

BS...) by the ASCII upload protocol must be prevented.

The baud rate must be between 9,600 baud and 57,600

baud. Other baud rates may lead to errors. The loading

procedure takes about 2 to 3 minutes for 57,600 baud; for

lower baud rates accordingly longer.

8.2.2

Activation and Process

Start of the flash update

The modem sends a response

The update is performed in two steps:

INSYS Modem 56k small INT 2.0/USB 1.0

AT**

Download initiated...

Transfer file with the help

of the terminal program.

June 06

Table of Contents

Do you have a question about the 56k small INT 2.0 and is the answer not in the manual?

56k small int usb 1.0