Remote Configuration (Remote Control) - INSYS 56k small INT 2.0 Operating Manual

INSYS Modem 56k small INT 2.0/USB 1.0

5.7 Remote Configuration (Remote Control)

5.7.1 Mode of Operation
Modem 1
(local modem)
To switch into the remote configuration mode, a data connec-
tion must be established between the modems. A certain
connection type is not mandatory, we recommend, however,
using only error corrected connections for remote configura-
tion, to avoid transfer errors for the commands.
The local modem is not required to master any remote con-
figuration type.
5.7.2 Remote modem preparation
Auto answer
Deactivate security callback
Release modem for remote configuration
Save entry
5.7.3 Remote modem password change
Change password
Enter old password (default: QWERTY)
Enter new password
Re-enter new password
June 06
Phone line
Modem 2
(remote modem)
ATS0=2
AT&Z1=
AT*R1
AT&W0
AT*C
OLD PASSWORD
QWERTY
NEW PASSWORD
Confirm
Functions
AT&W1
31