INSYS 56k small INT 2.0 Operating Manual page 32

Functions
5.7.4 Start of the remote configuration at the local modem
Dial the modem
The modem will establish a successful connection
Switch to remote configuration mode
Prompt for entering the password
Enter password (default: QWERTY)
If the entry was successful, the remote modem will send the
input prompt
5.7.5 Reduced command set
Some commands may not be executed during remote configuration
and
will result in the following response:
5.7.6 Terminate remote configuration
Before you complete the remote configuration, save all settings
in profile 0 or 1.
Several commands may be used for termination.
Return to online mode without software reset
Software reset with interruption of all connections
The modem loads the user configuration 0 or 1.
32
INSYS Modem 56k small INT 2.0/USB 1.0
ATD <phone num-
ber>
Connect...
****
Remote Access
Remote Passwort:
QWERTY
>
ATA
ATO
AT&F
ERROR
AT&W0
AT*E
ATZ0
ATD
AT/B
AT&W1
AT*X
ATZ1
June 06