Table of Contents
Advertisement
INSYS Modem 56k small INT 2.0/USB 1.0
After the second installation has been completed, the system has a new COM port avail-
able. You can check the installation by opening the device manager in the start menu at
Control Panel ->System -> Hardware -> Device Manager
June 06
In this example, the modem was installed at
COM port 4. The modem can now only be ad-
dressed via this COM port, using the configura-
tion software HSComm, for example.
For many applications, the installation up to
this point is sufficient.
If the modem is supposed to appear as a mo-
dem in the control panel as well (e.g. to setup a
RDT - remote data transmission - connection),
you must install an additional modem driver to
ensure the functioning of the installed COM
port. The following Chapter will show the de-
tails.
Initial Operation
15
Advertisement
Table of Contents
Need help?
Do you have a question about the 56k small INT 2.0 and is the answer not in the manual?
Questions and answers