Table of Contents
Advertisement
Memory Settings: Other Settings
Other Settings: The initial settings are shown below.
Beeper (BEEP VOLUME)
Auto Power OFF (AUTO PWR)
Positive/Negative Display (DISP . TYPE)
Beeper Volume
Auto Power OFF Time
Positive Display
Right Handed
Backlight Color Change
Return to Standby Time
Operation 2016-03-07
Big
3 min.
Po si
1. With unit turned OFF , hold down Select Switch and then press the Main Switch.
2. Press the Select Switch to select one of the settings.
3. Press the Plus or Minus switches to change the setting.
4. Press the Main Switch to return to the standby display.
Beeper Volume:
Press Plus or Minus switch to set beep volume used for switch operation and alarms at OFF ,
Low or Big.
Auto Power OFF Time:
The time lapse for automatic shut OFF when the unit is not used can be set from 1 to 15 min-
utes. Press Plus or Minus switch to set the time.
Negative Display
Left Handed
Backlight Color Change:
When this is turned ON, the backlight will change color depending on torque and file tip loca-
tion. It also changes color for setting displays. Does not change color when turned OFF .
Return to Standby Time:
Set the time that elapses before display returns to standby from settings displays. Set from 1
to 15 seconds by pressing Plus or Minus switches.
Right or Left Handed (DOMI. HAND)
Backlight (B.L.COLOR CHANGE)
Return to Standby Time (S.S.R TIME)
Positive / Negative Display:
Set display for black on white background or vice versa.
Right or Left Handed:
Set display for right- or left-handed user. Display turns up-
side down for left-handed users.
Ri ght
ON
5 sec.
16
Advertisement
Table of Contents
