Suzuki RV125K3 Setup Manual page 24

Before tightening the front axle, turn the
speedometer drive gearbox until the stopper
on the speedometer gearbox and the lug on
the left fork leg come in contact as shown.
A: Stopper (Speedometer drive gearbox)
B: Stopper (Left fork leg)
Tighten the front axle to the specified torque.
Front axle: 65 N·m (6.5 kgf-m)
A: Front axle
Tighten the axle clamp bolt to the specified torque.
Front axle clamp bolt: 23 N·m (2.3 kgf-m)
A: Axle clamp bolt
Place the motorcycle on the side stand, then remove
the hoist hook.
23