Brake Fluid - Suzuki RV125K3 Setup Manual

To install the seat, insert the seat hook into the seat
hook retainer.
A: Seat assembly
B: Seat hook
C: Seat hook retainer
D: Fastener
Tighten the bolts and push the front of seat down
firmly to fit the fastner.
A: Seat assembly
B: Bolt (with washer, with lock washer)

BRAKE FLUID

Keep the motorcycle upright and place the handle-
bars straight. Check the brake fluid level in the front
master cylinder reservoir. If the fluid level is below the
lower level indicated in the figure, add the correct type
of brake fluid. Refer to the chart below for the proper
selection.
Specification and Classification
Be careful not to spill any brake fluid on the
paint or plastic components as they will be
damaged.
A: Lower level line
35
DOT 4