Table of Contents
Advertisement
FRONT
REAR
1. Reinstall the battery in the motorcycle.
2. First connect the + lead to the + positive terminal
of the battery.
3. Cover + terminal with rubber boot.
4. Connect the - lead to the - negative terminal of
the battery.
A: + lead
B: - lead
C: Rubber boot
5. Reinstall the battery holder lid and fix the fastener
by pushing knob.
6. Reinstall the seat.
A: Battery holder lid
B: Fastener
BRAKE FLUID
Keep the motorcycle upright and place the handlebars
straight.
Check the brake fluid level in both the front and rear
master cylinder reservoirs.
If the fluid level is below the lower level indicated in the
figure, add the correct type of brake fluid.
Refer to the chart below for the proper selection.
Specification and Classification
Be careful not to spill any brake fluid on the
paint or plastic components as they will be
damaged.
A: Upper level line
B: Lower level line
27
DOT 4
Advertisement
Table of Contents
