Table of Contents
Advertisement
7.4.2
Application notes
The interface module is suitable for vertical and horizontal mounting positions
Other information
For more information on EMC and environmental conditions, refer to section "General
technical specifications (Page 13)"!
The following figure shows a typical application:
Figure 7-9
The digital inputs of the interface module are connected via cable SC62 to the SIMATIC TDC
outputs.
SIMATIC TDC hardware
System Manual, 12/2013, A5E01114865-07
Application example of an SB70 interface module on digital I/O module SM500
Interface module
7.4 Interface module SB70
179
Advertisement
Table of Contents
