Cp53M0 As Master - Siemens SIMATIC TDC System Manual

Communication modules
6.8 CP53M0 coupling module
6.8.1.2

CP53M0 as master

CP3M0 is parameterized in HWConfig for operation in master mode (default). In this mode,
two slave modules can be connected to CP53M0 (CS22 or CP53M0 (parameterized as
slave)).
Example 1
Connecting two SIMADYN D CS22 modules to CP53M0
One CS22 is connected to each of the FOC connectors X1/X2 or X3/X4 in a SIMADYN D
rack.
Figure 6-19
Table 6- 32
148
Options for connecting the CS22 to CP53M0 that is operating in master mode
Pin assignment of two CS22 on a CP53M0
CP53M0
X1
X2
X3
X4
CS22(1)
X6
X5
System Manual, 12/2013, A5E01114865-07
CS22(2)
X6
X5
SIMATIC TDC hardware