Interface module
7.1 Interface module SB10
7.1.2
Application notes
The interface module is suitable for vertical and horizontal mounting positions.
Other information
For more information on EMC and environmental conditions, refer to section "General
technical specifications (Page 13)"!
Example
The following figure shows a typical application:
Figure 7-2
The digital signals on system side are connected directly to the SIMATIC TDC modules via
the interface module. A cable SC62 is used accordingly.
160
Application example of an SB10 interface module on the digital I/O module SM500
SIMATIC TDC hardware
System Manual, 12/2013, A5E01114865-07