Connecting The Programmer To The Pc - Equinox Systems ISPnano IV-ATE Series Hardware User Manual

2.3.3 Connecting the programmer to the PC

The programmer can be controlled from a PC using any one of the 'Communications Ports' detailed
in the illustration / table below.
Key No
1 RS-485 Input (& output)
2 USB Port
3 RS-232 Communications Port
or
Remote Display / Keypad
8
Function
ISPnano Series IV-ATE Programmer - User Manual – V1.04 – 21/02/2014
Further description
RS-485 - Input/output. Connector: 5-pin 2.5mm Molex
USB - Input/output Connector: miniUSB connector
RS232 + LCD +5V power. Connector: RJ11