2.0 Getting Started Guide
2.1 Overview
This section of the manual details how to power the programmer and connect it to the PC.
2.2 System contents
The 'ISPnano Series 4 ATE' programmer is available as the 'ISPnano Series IV ATE' - Programmer
Module only or as a 'Programmer Kit' which includes the Programmer Module along with a power
supply, connector module, cables and software.
The full contents list of the 'ISPnanoS4-ATE Programmer Kit' (Order code: ISPnano-S4ATEKIT) is
detailed below.
6
Hardware
•
ISPnano Programming Module
(ISPnano-S4ATE version)
•
Mains Power Supply Wall Adaptor (9V DC
regulated @ 1.7A fitted with 2-pin JST
connector)
•
ISPnano – CONMOD Connector Module
(ISPnano-CONMOD)
•
ISPnano – EVAL Module (ISPnano-EVAL)
Cables
•
•
•
•
•
•
•
Software
•
•
Miscellaneous
•
ISPnano Series IV-ATE Programmer - User Manual – V1.04 – 21/02/2014
DC Power Cable (2-pin JST to bare wires)
RS232 Serial Cable (RJ11 to 9-way D
connector)
RS232 Extension Cable (9-way Female to
9-way Male Serial Cable)
6-way IDC ribbon cable
10-way IDC ribbon cable
16-way IDC ribbon cable
20-way IDC ribbon cable
EQTools (Project Management Utility for
Equinox Production ISP Programmers)
Upload Wizard (used to upload
Standalone Projects to the programmer)
4 x Rubber mounting feet (separate
packet)