Table of Contents
Advertisement
Programmer related - Application notes
The table below lists the Application Notes available for the ISPnano programmer range which
describe the USB driver installation, the different control methods available, firmware update
procedure and 'AVR Oscillator Calibration' procedure.
Application
Description
Note
AN109
Remote Application Control of Equinox ISP Programmers using ISP-PRO Utility
AN110
ASCII Text Control (ATC) Protocol for Remote Control of Equinox Programmers
AN111
ConsoleEDS Protocol for Remote Control of Equinox Programmers
AN112
Firmware Update instructions for Equinox ISP Programmers
AN114
Accurate on-chip Oscillator Calibration for Atmel AVR microcontrollers
AN121
Equinox EQTools – Release Notes
AN123
Controlling an Equinox ISP Programmer from a Remote System via the Remote 4-wire
TTL Port
AN126
USB Driver Installation instructions for PPM4-MK1 and ISPnano programmers
These application notes can be found in PDF format on the CD-ROM which was supplied with the
programmer. You can also find the very latest versions on the "ISPnano Download Page" on the
Equinox website.
xii
ISPnano Series IV-ATE Programmer - User Manual – V1.04 – 21/02/2014
Advertisement
Table of Contents
