Hardware Installation; Installation Steps - Fujitsu PRIMERGY RX100 S3 Operating Manual

4

Hardware Installation

V
CAUTION!
Please note the safety instructions in
page 15.
Do not expose the server to extreme environmental conditions (see
section "Technical Data" on page
heat.
The server must be acclimatized in its operating environment for an accli-
matization time.
Temperature difference (°C)
(operating environment/outside)
Table 2: Acclimatization time
4.1

Installation Steps

The following installation steps are described in detail in other sections of this
chapter:
Ê Unpacking the server (see next
Ê Mounting the server into the rack (see the layout arrangement created with
System Architect on the order lists).
Ê Cabling the server. Please also refer to the
Connecting and Disconnecting Cables" on page
Ê Connecting the server to the power supply (see
Server to the Mains" on page
U41615-J-Z156-1-76
5
10
15
20
25
30
37).
chapter "Important Notes" on
10). Protect it from dust, moisture, and
Minimum acclimatization time
section "Unpacking the
section "Instructions on
38.
section "Connecting the
(hours)
3
5
7
8
9
10
Server").
25