Introduction; Shipment And Packaging - ESAB PSF 260C Instruction Manual

2 INTRODUCTION

2 INTRODUCTION
The MIG / MAG welding torches of this series are exclusively intended for shielded- arc
welding using inert gas (MIG) or active gas (MAG) for industrial and commercial use by
suitably trained employees. The torches are only available in manual versions.
The ESAB PSF Centrovac MIG / MAG welding torches combine the advantages of the
PSF Standard Series with the ability off extraction fume in one process.
3

SHIPMENT AND PACKAGING

The components are carefully checked and packaged; however, damage may occur
during shipping.
Checking procedure on receipt of goods
Check that the shipment is correct by referring to the shipping note.
In case of damage
Check the package and components for damage (visual inspection).
In case of complaints
If the package and/or components have been damaged during shipment:
• Contact with the last carrier immediately.
• Keep the packaging (for possible inspection by the carrier or supplier, or for returning
the goods).
Storage in an enclosed space
Ambient temperature for shipment and storage: -20 °C to +55 °C
Relative air humidity: up to 90% at a temperature of 20 °C
DOKP4M4070
- 7 -
© ESAB AB 2020