Table of Contents
Advertisement
1 SAFETY
1
SAFETY
1.1
Meaning of symbols
As used throughout this manual: Means Attention! Be Alert!
DANGER!
Means immediate hazards which, if not avoided, will result in immediate, serious
personal injury or loss of life.
WARNING!
Means potential hazards which could result in personal injury or loss of life.
CAUTION!
Means hazards which could result in minor personal injury.
WARNING!
Before use, read and understand the instruction manual and
follow all labels, employer´s safety practices and Safety Data
Sheets (SDSs).
1.2
Safety precautions
ELECTRIC SHOCK - Can kill
•
Do not touch live electrical parts or electrodes with bare skin, wet gloves
or wet clothing.
•
Insulate yourself from work and ground.
•
Ensure your working position is safe.
FIRE HAZARD
•
Do not use if the power cord is broken or abnormal temperature variation
(not recommended as per manual/factsheet) seen on the oven as it may
can cause fire.
•
Make sure that there are no inflammable materials nearby.
HOT SURFACE - Parts can burn
•
Do not touch parts bare handed.
•
Allow cooling period before handling or working with the equipment.
•
To handle hot parts, use proper tools and/or insulated welding gloves to
prevent burns.
2
INTRODUCTION
2.1
Oven use and purpose
The SDF-250 range of drying and storing ovens are large temperature-controlled cabinets for welding
powder flux in a typical industrial set up. They are designed for convenient top loading and bottom
removal of welding flux. The easy-to-use digital controller sets and regulates the temperature over a
wide range for baking, drying, and storing. Electric heaters embedded inside walls evenly heat the flux
without needing agitation or flux turning. Heavy insulation, rugged industrial design, external surfaces
electrostatic paint coating, heavy lockable castors make these ovens a great investment for long term
easy use.
0448 020 001
- 4 -
© ESAB AB 2023
Advertisement
Table of Contents
