Interface Test - Siemens SINAMICS SL150 Reference Manual

2.5

Interface test

The analog, digital and serial interfaces between the drive and higher-level control on the
customer side are checked. The interface test can only be ordered and performed together with
the function acceptance.
During the tests, the drive is only supplied with auxiliary voltage.
Interface test
● Ethernet communication
● Signals to the customer's system
● Signals between the drive and cooling unit, if available
● Additional interfaces
The test is confirmed in a 3.1 certificate – or in the case that the customer has ordered the
acceptance test, in a 3.2 certificate.
SINAMICS SL150 6SL3865 F03 F70 F98 F79 F76
Reference Manual Rev.201902141427 SL150 wassergekühlt
General scope of services
2.5 Interface test
Order codes
Without the With the cus‐
customer tomer
present present
- F79
15