Function Test; Lighting In The Control Cabinet; Synchronization Equipment In The Control Cabinet - Siemens SINAMICS SL150 Reference Manual

Medium-voltage drive

Hide thumbs Also See for SINAMICS SL150:

Table of Contents

3.2

Function test

In this document, the tests of the following drive components are described.

● Power section

● Control cabinet

● Excitation unit

During the function test, all the ordered components are individually tested and documented.

3.2.1

Fundamentals

The lighting in the control cabinet is tested.

Test procedure

1. The door of the control cabinet is opened.

Result

The test is passed if the lighting works.

3.2.2

Fundamentals

The synchronization equipment synchronizes the drive to the phase angle of the supply

system.

Test procedure

1. The auxiliary voltage is present.

2. The synchronization voltage is applied.

3. The value of the synchronization voltage is read off from the test station computer and

Result

The test is passed if the voltage values match.

SINAMICS SL150 6SL3865 F03 F70 F98 F79 F76

Reference Manual Rev.201902141427 SL150 wassergekühlt

The lighting goes on.

compared with the applied voltage.

Tests

3.2 Function test

Table of Contents