Lexmark Pro910 Series
Fax card removal
1.
Remove the following:
a.
Left side cover.
b.
Right side cover. See
c.
System board shield. See
d.
Scanner unit. See
e.
Midframe cover and control panel. See
page
4-38.
Note: Do not detach the control panel from the midframe cover.
2.
Remove the three screws (A).
3.
Swivel the system board retaining plate outward to access the fax card.
4.
Disconnect the cable (B), and remove the two screws (C).
4-42
Service Manual
See"Left side cover removal" on page
"Right side cover removal" on page
"System board shield removal" on page
"Scanner unit removal" on page
"Midframe cover and control panel removal" on
4-23.
4-25.
4-28.
4-30.
Previous
Next
Go Back
Disassembly
Flowchart