Single Test Page; Manufacturing Mode; Clean Nozzles; Show Strings - Lexmark Pro910 Series Service Manual

Single Test Page

The test page contains the following information:
•
Code version
•
Date of Release
•
Page Count
•
Short Test Voltage
•
Printhead and Ambient Temperatures
•
Alignment and Media Sense Calibration Information
•
USB serial number
•
Mono/color/photo print head purges and ramps
•
Mono/color/photo print head temperatures
•
Cartridge address lines and data lines.
To print the Single Test Page:
1.
From the Manufacturing Test menu, navigate to Single Test Page.
2.
Touch

Manufacturing Mode

This option activates the Manufacturing Mode. The default setting is Off.
To change this setting:
1.
From Manufacturing Test, navigate to Manufacturing Mode.
2.
Select ON or OFF.
•
Selecting ON will POR the printer into Manufacturing Mode after the next POR.
•
Selecting OFF will POR the printer into user mode after the next POR.
3.
Touch Accept to save the setting, or touch
any changes.

Clean Nozzles

This option prints the standard Clean Nozzle Page.
To perform this procedure:
1.
From the Maintenance Test menu, navigate to Clean Nozzles.
2.
Touch

Show Strings

This option allows cycling through all available control panel strings in all languages.
To perform this procedure:
1.
From the Maintenance Test menu, navigate to Show Strings.
2.
Touch Previous or Next to cycle through the strings.
3.
Touch
to cancel printing and return to the Manufacturing Test menu.
or to cancel the procedure and return to the Manufacturing Test menu.
to return to the Manufacturing Test menu.
to return to the Manufacturing Test menu without saving
Lexmark Pro910 Series
3-9
Diagnostic aids
Previous
Next
Go Back