Connecting Tp-873Xr/Tp-874Xr - Kramer TP-873XR User Manual

Connecting TP-873XR/TP-874XR

Always switch off the power to each device before connecting it to your
873XR/TP-874XR. After connecting your TP-873XR/TP-874XR, connect its power and then
switch on the power to each device.
To connect the TP-873XR/TP-874XR as illustrated in the example in
1. On TP-873XR, connect an HDMI source (for example, a 4K Blu-ray player) to the
HDMI™ IN connector
2. On TP-874XR, connect the HDMI™ OUT connector
4K display).
3. Connect the
IN RJ-45 connector
4. Connect IR extension:
▪
On TP-873XR
the Blu-ray IR sensor.
▪
On TP-874XR
Point the Blu-ray IR remote control transmitter to that IR sensor to send commands
to the Blu-ray player via DGKat 2.0.
5. Connect RS-232 extension:
▪
On TP-873XR
RS-232 3-pin terminal block connector
▪
On TP-874XR
TP-873XR / TP-874XR – Connecting TP-873XR/TP-874XR
Figure 3: Connecting to the TP-873XR/TP-874XR Rear Panel
4 .
TP-873XR DGKAT-2 OUT RJ-45 connector
14 .
connect the IR 3.5mm mini jack
connect the IR 3.5mm mini jack
connect a controller (for example,
connect the RS-232 3-pin terminal block connector
13 to an acceptor (for example, a
5 to the
to an IR emitter and connect it to
7
16 to an IR sensor.
SL-240C room controller) to the
8 .
Kramer Electronics Ltd.
TP-
Figure 3:
TP-874XR DGKAT-2
17
to the display.
7