Kramer TP-588D User Manual
  1. Manuals
  2. Brands
  3. Kramer Manuals
  4. Receiver
  5. TP-588D
  6. User manual

Kramer TP-588D User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

USER MANUAL

MODEL:
TP-588D
HDBT to DVI/HDMI Receiver
P/N: 2900-300325 Rev 2
www.kramerAV.com

Advertisement

Table of Contents
loading

Related Manuals for Kramer TP-588D

Summary of Contents for Kramer TP-588D

  • Page 1: User Manual

    USER MANUAL MODEL: TP-588D HDBT to DVI/HDMI Receiver P/N: 2900-300325 Rev 2 www.kramerAV.com...

  • Page 4: Table Of Contents

    Kramer Protocol 3000 Commands 10.3 Parameters Figures Figure 1: TP-588D HDBT to DVI/HDMI Receiver Front Panel Figure 2: TP-588D HDBT to DVI/HDMI Receiver Rear Panel Figure 3: Connecting the TP-588D HDBT to DVI/HDMI Receiver Figure 4: Balanced Stereo Audio Connection...

  • Page 5: Introduction

    Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and GROUP 14: Collaboration. Congratulations on purchasing your Kramer TP-588D HDBT to DVI/HDMI Receiver. This product, which incorporates HDMI™ technology, is ideal for: ...

  • Page 6: Getting Started

    Avoid interference from neighbouring electrical appliances that may adversely influence signal quality  Position your TP-588D away from moisture, excessive sunlight and dust This equipment is to be used only inside a building. It may only be connected to other equipment that is installed inside a building.

  • Page 7: Recycling Kramer Products

    Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

  • Page 8: Overview

    Overview The high quality TP-588D HDBT to DVI/HDMI Receiver accepts an HDBaseT TP (Twisted Pair) signal from a compatible Kramer HDBaseT transmitter and decodes it into the following signals:   HDMI  S/PDIF, digital audio  Balanced, analog audio ...

  • Page 9: About Hdbaset™ Technology

    RK-3T adapter  Lockable EDID Kramer engineers have developed special twisted pair cables to best match our digital twisted pair products; BC−HDKat6a (CAT 6 23 AWG cable) significantly outperforms regular CAT 6 cables. We strongly recommend that you use shielded twisted pair cable About HDBaseT™...

  • Page 10: About The Power Over Ethernet Feature

    About the Power over Ethernet Feature Power over Ethernet passes electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to compatible devices. TP-588D - Overview...

  • Page 11: Defining The Tp-588D Hdbt To Dvi/Hdmi Receiver

    Defining the TP-588D HDBT to DVI/HDMI Receiver Figure 1 defines the front panel of the TP-588D. Figure 1: TP-588D HDBT to DVI/HDMI Receiver Front Panel Feature Function IR 3.5mm Mini Jack Connect to the IR emitter or sensor ‎ 5...

  • Page 12: Figure 2: Tp-588D Hdbt To Dvi/Hdmi Receiver Rear Panel

    Figure 2 defines the rear panel of the TP-588D. Figure 2: TP-588D HDBT to DVI/HDMI Receiver Rear Panel Feature Function ‎ 6 OPTION 4-way DIP-switch For setting device functions, (see Section S/PDIF Digital Audio RCA Connect to the stereo, digital audio acceptor...

  • Page 13: Connecting The Tp-588D

    1. Connect the HDBT Out RJ-45 connector on the transmitter, (for example, the TP-580Txr, WP-5VH2, or SID-X2N) to the HDBT In RJ-45 connector on the TP-588D using STP cable. 2. Connect the HDMI Out connector on the TP-588D to the HDMI acceptor, (for example, a projector). TP-588D - Connecting the TP-588D...

  • Page 14: Connecting A Device To The Tp-588D Via Rs-232

    3. Connect the RS-232 Data 3-pin terminal block on the TP-588D to the RS-232 controlled device, (for example, the projector). 4. Connect the Audio Out S/PDIF digital, RCA audio connector on the TP-588D to the audio acceptor, (for example, an audio amplifier with speakers).

  • Page 15: Operating The Tp-588D

    The default EDID is used in any case where there is no valid EDID When the EDID is locked a new EDID cannot override the locked EDID. Note: Performing a factory reset overrides the EDID even when the EDID is locked. TP-588D - Operating the TP-588D...

  • Page 16: Led Indicators

    HDBT link not valid 6.3.4 Power LED Power LED Color Power State Green The device is plugged into a power supply Orange The device is operating on PoE and receiving power from a PoE provider TP-588D - Operating the TP-588D...

  • Page 17: Resetting The Device To Factory Default Parameters

    To reset the device to factory default parameters: 1. Press and hold the Reset button on the rear panel of the device. 2. Power-cycle the device while holding the Reset button depressed. The device is reset to factory default parameters. TP-588D - Operating the TP-588D...

  • Page 18: Wiring The Tp Rj-45 Ethernet Connector

    Green / White Blue Blue / White Green Brown / White Brown Pair 1 4 and 5 Pair 2 1 and 2 Pair 3 3 and 6 Pair 4 7 and 8 TP-588D - Wiring the TP RJ-45 Ethernet Connector...

  • Page 19: Technical Specifications

    COMPLIANCE STANDARDS: ENVIRONMENTAL Complies with appropriate requirements of RoHs and REGULATORY COMPLIANCE: WEEE INCLUDED ACCESSORIES: Power supply RK-T2B 19” rack adapter OPTIONS: WARRANTY: 7 years parts and labor Specifications are subject to change without notice at http://www.kramerelectronics.com TP-588D - Technical Specifications...

  • Page 20: Default Parameters

    800x600p 75Hz 800x600p 72Hz 800x600p 60Hz 848x480p 60Hz 852x480p 60Hz 1024x768p 85Hz 1024x768p 75Hz 1024x768p 70Hz 1024x768p 60Hz 1280x960 60Hz 1280x1024p 75Hz 1280x1024p 60Hz 1280x768p 60Hz 1280x800p 60Hz 1920x1080p 50Hz 1920x1080p 60Hz 1920x1080p 30Hz 1920x1080p 24Hz TP-588D - Technical Specifications...
  • Page 21 1920x1080p 60Hz 1920x1080i 50Hz 1920x1080i 60Hz 1600x1200p 60Hz 1600x900p 60Hz 1152x864p 75Hz 1440x900p 60Hz 1680x1050p 60Hz 1360x768p 60Hz 1366x768 60Hz 1366x768 50Hz 1400x1050p 60Hz 720x480i 30Hz 3840x2160 30Hz 3840X2160 60Hz 4096x2160 30Hz TP-588D - Technical Specifications...

  • Page 22: Default Edid

    800 x 600p at 85Hz - VESA STD 640 x 480p at 85Hz - VESA STD 1152 x 864p at 70Hz - VESA STD 1280 x 960p at 60Hz - VESA STD EIA/CEA-861 Information Revision number..3 TP-588D - Default EDID...
  • Page 23 Front left/right center.. No Rear left/right center... No Rear LFE....No Report information Date generated... 20/07/2015 Software revision..2.60.0.972 Data source....File Operating system..6.1.7601.2.Service Pack 1 Raw data 00,FF,FF,FF,FF,FF,FF,00,2D,B2,01,00,01,00,00,00,FF,19,01,03,80,34,20,78,EA,B3,25,AC,51,30,B4,26, 10,50,54,FF,FF,80,81,8F,81,99,A9,40,61,59,45,59,31,59,71,4A,81,40,01,1D,00,72,51,D0,1E,20,6E,28, 55,00,07,44,21,00,00,1E,00,00,00,FF,00,35,30,35,2D,38,30,32,32,36,30,31,30,20,00,00,00,FC,00,54, 50,2D,35,38,38,44,20,20,20,20,20,20,00,00,00,FD,00,38,4C,1E,53,11,00,0A,20,20,20,20,20,20,01,30, 02,03,1B,F1,23,09,07,07,48,10,05,84,03,02,07,16,01,65,03,0C,00,10,00,83,01,00,00,02,3A,80,18,71, 38,2D,40,58,2C,45,00,07,44,21,00,00,1E,01,1D,80,18,71,1C,16,20,58,2C,25,00,07,44,21,00,00,9E,01, 1D,00,72,51,D0,1E,20,6E,28,55,00,07,44,21,00,00,1E,8C,0A,D0,8A,20,E0,2D,10,10,3E,96,00,07,44,21, 00,00,18,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,47 TP-588D - Default EDID...

  • Page 24: Protocol 3000

    Protocol 3000 The TP-588D can be operated using serial commands from a PC, remote controller or touch screen using the Kramer Protocol 3000. This section describes the:  ‎ 1 Kramer Protocol 3000 syntax (see Section 0.1)  ‎ 1...
  • Page 25 CRLF – For device messages; carriage return (ASCII 13) + line-feed (ASCII 10) Command chain separator character When a message string contains more than one command, a pipe ( '|' ) character separates each command. Spaces between parameters or command terms are ignored. TP-588D - Protocol 3000...
  • Page 26 You can directly enter all commands using a terminal with ASCII communications software, such as HyperTerminal, Hercules, etc. Connect the terminal to the serial or Ethernet port on the Kramer device. To enter CR press the Enter key. ( LF is also sent but is ignored by command parser).

  • Page 27: Kramer Protocol 3000 Commands

    Command Type - System-mandatory Command Name Permission Transparency Set: End User Public Get: Description Syntax Set: Protocol handshaking #␍ Get: Response ~nn@␠OK␍␊ Parameters Response Triggers Notes Use to validate the Protocol 3000 connection and get the machine number TP-588D - Protocol 3000...
  • Page 28 Response is sent after every change in output HPD status ON to OFF Response is sent after every change in output HPD status OFF to ON and ALL parameters (new EDID, etc.) are stable and valid Notes TP-588D - Protocol 3000...
  • Page 29 Get EDID color space # EDID-CS?␠id␍ Response EDID-CS␠id, ColSpace␍␊ Parameters id – channel number ColSpace – color space (see Section ‎ 1 0.3.7 EDID Color Space) Response Triggers Notes Set command might change the current EDID TP-588D - Protocol 3000...
  • Page 30 (button press, device menu and similar) or HDCP mode changed Notes Set HDCP working mode on the device input: HDCP supported - HDCP_ON [default] HDCP not supported - HDCP OFF HDCP support changes following detected sink - MIRROR OUTPUT TP-588D - Protocol 3000...
  • Page 31 Get command list or help for specific Get: 1. #HELP␍ command 2. #HELP␠command_name␍ Response 1. Multi-line: ~nn@Device available protocol 3000 commands:␍␊command,␠command…␍␊ To get help for command use: HELP (COMMAND_NAME)␍␊ 2. Multi-line: ~nn@HELP␠command:␍␊description␍␊USAGE:usage ␍␊ Parameters Response Triggers Notes TP-588D - Protocol 3000...
  • Page 32 - String of up to 14 alpha-numeric chars (can include hyphen, not at the beginning or end) Response Triggers Notes The machine name is not the same as the model name. The machine name is used to identify a specific machine or a network in use (with DNS feature on) TP-588D - Protocol 3000...
  • Page 33 To connect with a randomly assigned IP by DHCP, specify the device DNS name (if available) using the command “NAME”. You can also get an assigned IP by direct connection to USB or RS-232 protocol port if available For proper settings consult your network administrator TP-588D - Protocol 3000...
  • Page 34 Public NET-IP? Get: End User Public Description Syntax Set: Set IP address #NET-IP␠ip_address␍ Get: Get IP address #NET-IP?␍ Response ~nn@ NET-IP␠ip_address␍␊ Parameters ip_address - format: xxx.xxx.xxx.xxx Response Triggers Notes For proper settings consult your network administrator TP-588D - Protocol 3000...
  • Page 35 Set subnet mask #NET-MASK␠net_mask␍ Get: Get subnet mask #NET-MASK?␍ Response ~nn@NET-MASK␠net_mask␍␊ Parameters net_mask - format: xxx.xxx.xxx.xxx Response Triggers The subnet mask limits the Ethernet connection within the local network For proper settings consult your network administrator Notes TP-588D - Protocol 3000...
  • Page 36 Response Triggers Notes To avoid locking the port due to a USB bug in Windows, disconnect USB connections immediately after running this command. If the port was locked, disconnect and reconnect the cable to reopen the port. TP-588D - Protocol 3000...
  • Page 37 Description Syntax Set: Get: Get device serial number #SN?␍ Response ~nn@SN␠serial_number␍␊ Parameters serial_number - 11 decimal digits, factory assigned Response Triggers Notes For new products with 14 digit serial numbers, use only the last 11 digits TP-588D - Protocol 3000...

  • Page 38: Parameters

    720(1440)x480i @59.94Hz/60Hz 720(1440)x240p @59.94Hz/60Hz 720(1440)x240p @59.94Hz/60Hz 2880x480i @59.94Hz/60Hz 2880x480i @59.94Hz/60Hz 2880x240p @59.94Hz/60Hz 2880x240p @59.94Hz/60Hz 1440x480p @59.94Hz/60Hz 1440x480p @59.94Hz/60Hz 1920x1080p @59.94Hz/60Hz 720x576p @50Hz 720x576p @50Hz 1280x720p @50Hz 1920x1080i @50Hz 720(1440)x576i @50Hz 720(1440)x576i @50Hz 720(1440)x288p @50Hz 720(1440)x288p @50Hz TP-588D - Protocol 3000...
  • Page 39 720x480p @119.88/120Hz 720x480p @119.88/120Hz 720(1440)x480i @119.88/120Hz 720(1440)x480i @119.88/120Hz 720x576p @200Hz 720x576p @200Hz 720(1440)x576i @200Hz 720(1440)x576i @200Hz 720x480p @239.76/240Hz 720x480p @239.76/240Hz 720(1440)x480i @239.76/240Hz 720(1440)x480i @239.76/240Hz 1280x720p @23.97Hz/24Hz 1280x720p @25Hz 1280x720p @29.97Hz/30Hz 1920x1080p @119.88/120Hz 1920x1080p @100Hz 65-100 (Reserved) TP-588D - Protocol 3000...
  • Page 40 Sink and EDID is valid 10.3.6 HDCP Types Number Value HDCP Off HDCP On Follow input Mirror output (“MAC mode”) 10.3.7 EDID Color Space Number Value auto RGB + YUV444 RGB + YUV422 RGB + YUV444 + YUV422 TP-588D - Protocol 3000...

  • Page 42: Safety Warning

    SAFETY WARNING Disconnect the unit from the power supply before opening and servicing For the latest information on our products and a list of Kramer distributors, visit our Web site to find updates to this user manual. We welcome your questions, comments, and feedback.

Table of Contents