Kramer PT-110 User Manual
Xga line transmitter; xga line receiver
Hide thumbs
Also See for PT-110:
- User manual (19 pages) ,
- User manual (17 pages) ,
- User manual (16 pages)
Related Manuals for Kramer PT-110
Summary of Contents for Kramer PT-110
- Page 1 Kramer Electronics, Ltd. USER MANUAL Models: PT-110, XGA Line Transmitter WP-110, XGA Line Transmitter PT-120, XGA Line Receiver TP-120, XGA Line Receiver...
-
Page 2: Table Of Contents
Table 3: PT-120 XGA Line Receiver Features Table 4: TP-120 XGA Line Receiver Features Table 5: TP-120 XGA Line Receiver (Underside) Features Table 6: CAT 5 PINOUT Table 7: Technical Specifications of the PT-110 / WP-110 / PT-120 / TP-120... -
Page 3: Introduction
GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Products 2 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com 3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com... -
Page 4: Overview
PT-120 or TP-120 constitutes a VGA/XGA-to-Twisted Pair Transmitter and Receiver. The Kramer Pico TOOLS PT-110 is an XGA line transmitter that receives an XGA signal and transmits it over a CAT 5 cable to the PT-120 or TP-120 receiver. In particular, the PT-110:... -
Page 5: Pt-120 Xga Line Receiver
TP-120 XGA Line Receiver The Kramer TOOLS TP-120 is an XGA line receiver that receives a coded CAT 5 signal transmitted by either the WP-110 or the PT-110, decodes it and converts it to an XGA output. In particular, the TP-120:... -
Page 6: Shielded Twisted Pair (Stp) / Unshielded Twisted Pair (Utp)
We recommend that you use shielded twisted pair (STP) cable. There are different levels of STP cable available, and we advise you to use the best quality STP cable that you can afford. Our STP skew-free cable, Kramer BC-SXTP, is intended for transmitting VGA signals. Our non-skew-free cable, Kramer BC-STP, is intended for digital signals. -
Page 7: Your Xga Line Transmitter(S) / Receiver
WP-110 XGA Line Transmitter (see section 4.2) PT-120 XGA Line Receiver (see section 4.3) TP-120 XGA Line Receiver (see section 4.4) Your PT-110 XGA Line Transmitter Figure 1 and Table 1 define the PT-110: Figure 1: PT-110 XGA Line Transmitter Table 1: PT-110 Features Feature... -
Page 8: Your Wp-110 Xga Line Transmitter
The WP-110 is available in three versions: one for the US, one for Belgium and Germany, and one for the UK and most of Europe , as Figure 2 and Table 2 define: Figure 2: WP-110 XGA Line Transmitter 1 Excluding Belgium and Germany KRAMER: SIMPLE CREATIVE TECHNOLOGY... -
Page 9: Your Pt-120 Xga Line Receiver
Your XGA Line Transmitter(s) / Receiver Table 2: WP-110 XGA Line Transmitter Features Feature Function XGA IN 15-pin HD (F) Connect to the XGA source Connector ON LED Illuminates when receiving power Switch Slide the switch to the left to change the HS polarity to (NEG.) negative polarity ;... -
Page 10: Your Tp-120 Xga Line Receiver
Adjusts the cable compensation equalization level LINE IN RJ-45 Connector Connects to the LINE OUT RJ-45 connector on the PT-110 or WP-110 XGA Line Receiver Your TP-120 XGA Line Receiver This section describes the TP-120 XGA Line Receiver and its underside. -
Page 11: Figure 5: Tp-120 Xga Line Receiver (Underside)
+12V DC connector for powering the unit XGA OUT 15-pin HD (F) Connect to the XGA acceptor Connector LINE IN RJ-45 Connector Connects to the LINE OUT RJ-45 connector on the PT-110 or WP-110 XGA Line Receiver ON LED Illuminates when receiving power LEVEL Trimmer... -
Page 12: Using The Xga Line Transmitter(S) / Receiver
1 You can use the WP-110 (not shown in Figure 6) instead of the PT-110. For details, see section 5.1 2 For distances of up to 100 meters you can connect a power adapter to either the PT-110 or TP-120. Above it, both sides... -
Page 13: Installing The Wp-110 Xga Line Transmitter
Using the XGA Line Transmitter(s) / Receiver Figure 6: XGA-to-Twisted Pair Transmitter and Receiver System via UTP Cable Installing the WP-110 XGA Line Transmitter To install your WP-110 XGA Line Transmitter: 1. Connect the LINE OUT RJ-45 connector to the pre-installed UTP wiring in the wall box opening that connects via UTP cabling to the LINE IN RJ-45 connector of the PT-120 or TP-120. -
Page 14: Wiring The Cat 5 Line In / Line Out Rj-45 Connectors
4 and 5 Pair 1 4 and 5 Pair 2 3 and 6 Pair 2 1 and 2 Pair 3 1 and 2 Pair 3 3 and 6 Pair 4 7 and 8 Pair 4 7 and 8 KRAMER: SIMPLE CREATIVE TECHNOLOGY... -
Page 15: Technical Specifications
Technical Specifications Technical Specifications Table 7 lists the technical specifications: Table 7: Technical Specifications of the PT-110 / WP-110 / PT-120 / TP-120 PT-110 WP-110 PT-120 TP-120 INPUTS: 1 VGA / UXGA on a 1 VGA / UXGA on a... - Page 16 KRAMER: SIMPLE CREATIVE TECHNOLOGY...
- Page 17 For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.