Related Manuals for Kramer TP-581T
Summary of Contents for Kramer TP-581T
-
Page 1: User Manual
K R A ME R E LE CT R O N IC S L TD . USER MANUAL MODELS: TP-581T HDMI Line Transmitter TP-582T HDMI Switcher/ Line Transmitter TP-582R HDMI Line Receiver DA P/N: 2900-000582 Rev 6... -
Page 3: Table Of Contents
Acquiring the EDID Technical Specifications Default EDID Figures Figure 1: TP-581T HDMI Line Transmitter Figure 2: TP-582T HDMI Switcher/Line Transmitter Figure 3: TP-582R HDMI Line Receiver DA Figure 4: Connecting the TP-582T and TP‑582R Figure 5: Controlling a DVD Player via the TP-582R... -
Page 4: Introduction
Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have redesigned and upgraded most of our... -
Page 5: Getting Started
Avoid interference from neighboring electrical appliances that may adversely influence signal quality Position your Kramer TP-581T, TP-582T and TP-582R away from moisture, excessive sunlight and dust This equipment is to be used only inside a building. It may only be connected to other equipment that is installed inside a building. -
Page 6: Safety Instructions
Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at http://www.kramerelectronics.com/support/recycling/. -
Page 7: Overview
The TP-581T is identical to the TP-582T but has only one HDMI input. Since the TP-581T has only one input, it does not have the input selection control which the TP-582T has (that is, contact closure, IR and front panel input selection). -
Page 8: About Hdbaset™ Technology
Momentary remote contact closure for input switching Front panel input select button IR remote control input switching (via the Kramer IR remote control transmitter) The TP-582R HDMI Line Receiver DA also features: One RJ-45 CAT 5 input connector ... -
Page 9: Using Twisted Pair Cable
Using Twisted Pair Cable Kramer engineers have developed special twisted pair cables to best match our BC−HDKat6a digital twisted pair products; the Kramer (CAT 6 23 AWG cable) significantly outperforms regular CAT 5 / CAT 6 cables. We strongly recommend that you use shielded twisted pair cable. -
Page 10: Defining The Devices
Lights when an HDMI input device is connected OUT LED Lights when an HDMI output device is detected LINK LED Lights when the TP connection is active ON LED Lights when receiving power TP-581T, TP-582T and TP‑582R - Defining the Devices... -
Page 11: Your Tp-582T Hdmi Switcher/Line Transmitter
Lights when the HDMI 2 input device is connected OUT LED Lights when an HDMI output device is detected LINK LED Lights when the TP connection is active ON LED Lights when receiving power TP-581T, TP-582T and TP‑582R - Defining the Devices... -
Page 12: Your Tp-582R Hdmi Line Receiver Da
Lights when the HDMI 1 output device is connected OUT 2 LED Lights when the HDMI 2 output device is connected LINK LED Lights when the TP connection is active ON LED Lights when receiving power TP-581T, TP-582T and TP‑582R - Defining the Devices... -
Page 13: Connecting The Devices
TP-582T and TP‑582R, connect its power and then switch on the power to each device. You can use the TP-581T HDMI Line Transmitter or the TP-582T HDMI Switcher/Line Transmitter with the TP-582R HDMI Line Receiver DA to configure an HDMI transmitter/receiver system. -
Page 14: Connecting The Tp-582R
9. If required, acquire the EDID (see Section 5.6). 10. Connect the 5V DC power adapter to the power socket and connect the adapter to the mains electricity (not shown in Figure TP-581T, TP-582T and TP‑582R - Connecting the Devices... -
Page 15: Figure 4: Connecting The Tp-582T And Tp-582R
Figure 4: Connecting the TP-582T and TP‑582R TP-581T, TP-582T and TP‑582R - Connecting the Devices... -
Page 16: Controlling The Av Equipment Via An Ir Transmitter
Controlling the AV Equipment via an IR Transmitter Since the IR signal on the TP-581T/TP-582T and the TP-582R is bidirectional, you can use a remote control transmitter to send commands (to the AV equipment) from either end of the transmitter /Receiver system. To do so you have to use the Kramer external IR sensor and the Kramer IR emitter cable. -
Page 17: Figure 6: Controlling An Lcd Display Via The Tp-582T
Figure 6 illustrates how to control the LCD display via the TP-581T/TP-582T. Figure 6: Controlling an LCD Display via the TP-582T TP-581T, TP-582T and TP‑582R - Connecting the Devices... -
Page 18: Controlling The Tp-582T Via The Remote Terminal Block Connector
9-wire straight cable (pin 2 to pin 2, pin 3 to pin 3, pin 5 to pin 5) to the RS-232 9-pin D-sub port on your PC. TP-581T, TP-582T and TP‑582R - Connecting the Devices... -
Page 19: Wiring The Rj-45 Connectors
Note, that the cable ground shielding must be connected / soldered to the connector shield. Figure 8: TP PINOUT EIA /TIA 568B Wire Color Orange / White Orange Green / White Blue Blue / White Green Brown / White Brown TP-581T, TP-582T and TP‑582R - Connecting the Devices... -
Page 20: Acquiring The Edid
1. Disconnect the power on the TP-582R. 2. Connect the new acceptor (to HDMI OUT 1, if two outputs are connected). 3. Connect the power. The EDID is acquired only if the power is disconnected and then reconnected TP-581T, TP-582T and TP‑582R - Connecting the Devices... -
Page 21: Technical Specifications
18.8cm x 11.4cm x 2.4cm (7.4" x 4.5" x 1.0") W, D, H WEIGHT: 0.6kg (1.4lbs) INCLUDED Power supply ACCESSORIES: RK-T2B 19” rack mount, Kramer BC−HDKat6a cable OPTIONS: Specifications are subject to change without notice at http://www.kramerelectronics.com TP-581T, TP-582T and TP‑582R - Technical Specifications... -
Page 22: Default Edid
Modeline...."1920x1080" 74.250 1920 2008 2052 2200 1080 1084 1094 1124 interlace +hsync +vsync Detailed timing #3..1280x720p at 60Hz (16:10) Modeline...."1280x720" 74.250 1280 1390 1430 1650 720 725 730 750 +hsync +vsync Detailed timing #4..720x480p at 60Hz (16:10) TP-581T, TP-582T and TP‑582R - Default EDID... - Page 23 Rear left/right center... No Rear LFE....No Report information Date generated... 29/04/2012 Software revision..2.60.0.964 Data source....Real-time 0x0031 Operating system..5.1.2600.2.Service Pack 3 Raw data 00,FF,FF,FF,FF,FF,FF,00,2E,4D,20,58,01,01,01,01,0A,13,01,03,80,34,20,78,EA,B3,25,AC,51,30,B4,26, 10,50,54,A5,4B,00,81,80,A9,40,71,4F,01,01,01,01,01,01,01,01,01,01,01,1D,00,72,51,D0,1E,20,6E,28, 55,00,07,44,21,00,00,1E,00,00,00,FF,00,35,30,35,2D,37,30,37,34,35,35,30,31,30,00,00,00,FC,00,54, 50,2D,35,38,32,20,20,20,20,20,20,0A,00,00,00,FD,00,38,4C,1E,53,11,00,0A,20,20,20,20,20,20,01,86, 02,03,1B,F1,48,10,05,84,03,02,07,16,01,23,09,07,07,65,03,0C,00,10,00,83,01,00,00,02,3A,80,18,71, 38,2D,40,58,2C,45,00,07,44,21,00,00,1E,01,1D,80,18,71,1C,16,20,58,2C,25,00,07,44,21,00,00,9E,01, 1D,00,72,51,D0,1E,20,6E,28,55,00,07,44,21,00,00,1E,8C,0A,D0,8A,20,E0,2D,10,10,3E,96,00,07,44,21, 00,00,18,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,47 TP-581T, TP-582T and TP‑582R - Default EDID...
- Page 25 For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.com SAFETY WARNING...