Table of Contents
Advertisement
Components
The main components of the RML-1500XL ATV/Motorcycle Lift are:
• Platform. The flat section on which you put the ATV or Motorcycle. Includes the Clamp
Assembly (for clamping the front tire). The Platform is used standalone in Motorcycle Mode or
with the Front and Side Extensions installed in ATV Mode.
• Side Extensions. Optional. Make the Platform wider. Used in ATV Mode.
• Front Extension. Optional. Makes the Platform longer. Used in ATV Mode.
• Base. The bottom section of the Lift. It includes the Adjustment Rods, the Safety Lock Plate, the
Safety Locks, and the Ramps.
• Safety Lock Release Handle. Controls the location of the Safety Lock Plate. When in the Lock
position, lowering the Lift engages the Lift on a Safety Lock. When in the Release position,
lowering the Lift moves the Lift all the way to the ground.
• Safety Locks. Hold the Lift in position at the desired height once engaged.
• Safety Lock Plate. The part of the Lift that engages on the Safety Locks.
• Placement Holes. Where the ATV Ramps (in ATV Mode) or the Motorcycle Ramp (in Motorcycle
Mode) connect to the Base of the Lift.
• Hydraulic Cylinder. Raises and Lowers the Platform using hydraulic energy from the Pump.
Not to scale. Mixes side and top views. Front Extension not installed.
• ATV Ramps. Two square gray ramps, wide enough (when both are installed) to accommodate
ATVs. Used in ATV Mode only.
RML-1500XL ATV / Motorcycle Lift
6
P/N 5900183 — Rev. E — Feb. 2020
Advertisement
Table of Contents
