Table of Contents
Advertisement
Maintenance
⚠
WARNING
To maintain your ATV/Motorcycle Lift:
• Cleanliness. Make sure to keep the Lift clean and free of debris and dirt. Wipe it down after
each use; remove any grease, dirt, or other debris.
• Clamp Assembly. Be careful not to bump or bend the Clamp Assembly. If bent, it may not work
correctly.
• Hydraulic Fluid. The small amount of Hydraulic Fluid in the Pump generally does not need to be
changed or added to. If you think your Lift has dirty or low Hydraulic Fluid, visit
www.bendpak.com/support/
RML-1500XL ATV / Motorcycle Lift
Disconnect the Lift from its pressurized Air Supply (if connected) before
performing any troubleshooting procedures. The Lift uses pneumatic (air)
energy; if your organization has Lockout/Tagout policies, make sure to
implement them once the Lift is connected to a pressurized Air Supply.
or call BendPak Ranger at (805) 933-9970.
22
P/N 5900183 — Rev. E — Feb. 2020
Advertisement
Table of Contents
