Table of Contents
Advertisement
• Motorcycle Ramp. One long yellow ramp; wide enough to use for motorcycles only when used
in Motorcycle Mode. Can also be used on top of the two gray ATV Ramps in ATV Mode.
• Stability Rods. Two long steel pieces with threads on one end. They connect to the underside of
an ATV Ramp, providing stability for the ATV Ramps. Used in ATV Mode only.
• Adjustment Rods. Two on each end of the Lift. When turned, the Casters on the underside of
the Lift (which are hidden during normal operation) move down, allowing you to move the Lift.
• Hole with Caster Adjustment Rod. Located on the Ramp end of the Lift; provides access to the
top of the Adjustment Rod.
• Clamp Assembly. Opens and closes to let you securely hold the front tire of the vehicle on the
Platform. Can be bolted to the Platform (Motorcycle Mode) or to the Front Extension (ATV
Mode).
• Air/Hydraulic Pump. Uses pneumatic (air) power to provide hydraulic power to raise the Lift. If
you have a pressurized air supply available (90 to 160 psi), you can connect it to the Pump to
raise the Lift. If you do not have an air supply, you can use the Raising Pedal.
• Adjustable Legs. Located under the Ramp end of the Lift, they allow you to adjust how far
down the Platform comes. What you want is for the top of the Ramps and the top of the
Platform to be level with each other.
RML-1500XL ATV / Motorcycle Lift
7
P/N 5900183 — Rev. E — Feb. 2020
Advertisement
Table of Contents
