Advertisement
Setup and Operation Manual
Manual P/N 5900385 — Manual Revision E — August 2018
Model:
• RST-500ES
⚠
DANGER
Engine Support
Read the entire contents of this manual before using this product.
Failure to follow the instructions and safety precautions in this
manual can result in serious injury or death. Make sure all other
operators also read this manual. Keep this manual near the product
for future reference. By proceeding with operation, you agree that
you fully understand the contents of this manual.
1645 Lemonwood Dr.
Santa Paula, CA 93060 USA
Toll Free: 1 (800) 253-2363
Tel: 1 (805) 933-9970
rangerproducts.com
Advertisement
Table of Contents
Related Manuals for Ranger RST-500ES
Summary of Contents for Ranger RST-500ES
- Page 1 Engine Support Setup and Operation Manual Manual P/N 5900385 — Manual Revision E — August 2018 Model: • RST-500ES ⚠ Read the entire contents of this manual before using this product. Failure to follow the instructions and safety precautions in this DANGER manual can result in serious injury or death.
- Page 2 Feel free to contact us at any time to get the latest information about any product: rangerproducts.com Warranty. The BendPak Ranger warranty is more than a commitment to you: it is also a commitment to the value of your new product. For full warranty details and to register your new BendPak Ranger product, contact your nearest BendPak Ranger dealer or visit www.bendpak.com/support/warranty.
-
Page 3: Shipping Information
Introduction This manual describes the RST-500ES Engine Support, which safely holds the weight of your Vehicle’s engine, up to 1,500 pounds / 680 kg, as you perform service and maintenance. More information about the full line of Ranger Products is available at rangerproducts.com. -
Page 4: Liability Information
BendPak Ranger assumes no liability for damages resulting from: • Use of the product for purposes other than those described in this manual. • Modifications to the product without prior, written permission from BendPak Ranger. • Damage to the product from external influences. •... -
Page 5: Specifications
⚠ CAUTION You must wear appropriate protective equipment when setting up and using your Engine Support: leather gloves, non-skid steel-toed work boots, eye protection, back belts, and hearing protection. RST-500ES Engine Support P/N 5900385 — Rev. E — August 2018... -
Page 6: Operation
Monthly. Lubricate the Adjustable Screw with light oil. • Every three months. Fully clean the Engine Support. If you have problems with your Engine Support, call Ranger Products at (805) 933-9970 or visit www.bendpak.com/support/. RST-500ES Engine Support P/N 5900385 — Rev. E — August 2018... -
Page 7: Parts Breakdown
Description Description Spring Pin Rubber Block Handwheel Chain Knob Adjustable Screw Washer Lock Bolt Telescoping Beam Grip Support Mounting Main Beam Bolt M12 x 25 Grip Handle Platform Assembly RST-500ES Engine Support P/N 5900385 — Rev. E — August 2018... - Page 8 1645 Lemonwood Drive Santa Paula, CA 93060 USA © 2018 BendPak Inc. All rights reserved. bendpak.com...
Need help?
Do you have a question about the RST-500ES and is the answer not in the manual?
Questions and answers