Creating Your Own Options Board; Internal Options Board - Tait TM8000 Series Applications Manual

4

Creating Your Own Options Board

4.1

Internal Options Board

TM8000 3DK Hardware Developer's Kit Application Manual
September 2003 © Tait Electronics Ltd
TM8000 radios provide space for the following options boards:
an internal options board inside the radio body using the internal options
I
connector and (optional) the hole provided for the external options
connector
a blank control head options board (TM8105 only) between the radio
I
body and the blank control head using the control-head connector
This chapter describes the mechanical envelopes of these options boards,
common design practices and EMC guidelines and the Internal Options Kit
available from Tait.
Important
Modifications to radio-frequency transmitting equipment
can void the user's authority to operate the equipment.
By distributing the TM8000 3DK Hardware Developer's
Kit, Tait Electronics Ltd. does not accept liability for any
non-compliance or infringement of intellectual property
rights resulting from the application or use of this kit or
information. Any person modifying Tait radio-frequency
transmitting equipment is responsible for ensuring that the
modified equipment meets all legal and regulatory require-
ments in the country of use or supply.
TM8000 radios provide space inside the radio body to accommodate an
internal options board.
The internal options board is connected to the internal options connector
and can also use the hole provided for the external options connector.
The internal options connector is described
The provision for the external options connector is described
Examples of internal options boards available from Tait:
TMAA30-02 3DK Application Board.
I
Refer to the TM8000 3DK Application Board Service Manual.
TMAA01-01 Line-Interface Board.
I
Refer to the TM8100 Mobile Radio Accessories Manual.
TMAA01-05 Options Extender Board.
I
Refer to the TM8100 Mobile Radio Accessories Manual.
on page 28.
Creating Your Own Options Board
on page 31.
85