Altering User Options - Tait T2020 Series II Operator's Manual

Altering User Options

While most of the features available on the T2020II are able to be customised with the Tait program-
ming software, some may be directly accessible to you, to alter according to your own requirements.
This is done via the Function menu, as follows:
1. Press the Function (
display window.
2. Scroll through the items in the display window, by pressing the Up and Down (
keys.
3. Most Function menu items have an 'on' and 'off' setting. To change the current setting, press the
Enter (
4. To exit the Function menu, press any of the other function keys. The radio may also be pro-
grammed to return to one of the other modes after a short while, anyway.
The following table shows Function menu options that can be changed in this way.
Option
A-TX ON / A-TX OFF
BEEP ON / BEEP OFF
BEEP HI / BEEP LOW
ELIT DIM / ELIT OFF
HUSH ON / HUSH OFF
HORN ON / HORN OFF
LITE FUL / LITE DIM
STAT NRM / STAT FIX
28
) key, and the item last viewed while in this mode appears in the
Fn
) key.
Description
Selects whether or not the radio automatically transmits when DTMF
digits are dialled.
Selects whether or not your radio sounds key-press confidence tones
( beeps ).
Alters the loudness of the confidence tones ( beeps ).
Adjusts the display's economy mode backlighting level between
dimmed and off.
Selects whether the radio is able to mute an external device, such
as a car stereo, when you transmit or receive a call. (This function
also requires the radio to be equipped with the necessary hardware
interface.)
Selects whether the radio sounds a vehicle horn, or similar device, when a
received call is unanswered. (This function also requires the radio to be
equipped with the necessary hardware interface.)
Adjusts the display's normal backlighting level between full and
dimmed.
Selects whether your Selcall status is displayed as a full word or a
number.
/ )