Problem Solutions And Tips; Power-On Indicator Remains Dark - Fujitsu PRIMERGY RX100 Operating Manual

6

Problem Solutions and Tips

V
CAUTION!
Observe the safety information in the "Security, Warranty and
Ergonomics" manual and in chapter "Hardware Installation" on page 21.
If a problem occurs, try to resolve it as described:
– in this chapter,
– in the documentation for the attached devices,
– in the help systems of the software used.
If you fail to correct the problem, proceed as follows:
Ê Make a note of the steps and the circumstances that led to the fault. Note
also any error message which may have been displayed.
Ê Switch the server OFF.
Ê Contact our Service organization (see „Warranty" under "Related publica-
tions" on page 57).
6.1

Power-ON Indicator Remains Dark

The power-ON indicator remains dark after switching ON:
Power cable not connected correctly
Ê Make sure that the power cable is correctly connected to the server and to
the grounded power socket.
Power supply overloaded
Ê Pull the server power plug out of the power socket.
Ê Wait a few seconds and plug the power plug into the power socket again.
Ê Switch your server ON.
A26361-K875-Z102-3-7619
51