Installing/Removing the Server into the Rack
4.3.2
Preparing the Server
Figure 3: Preparing the server
Ê Fasten the cable arrangement assembly with three screws on each side (1)
to the frontal mounting bracket (lower row of holes) on the server as shown
in figure 3.
Ê Mount two cable holders (2) on each support plate. The mounting studs of
the cable holders must lock into position of the designated holes on the
support plate.
Ê Fasten the support rail with three screws on each side (3) to the frontal
mounting bracket (lower row of holes) on the server as shown in figure 3.
28
Hardware Installation
A26361-K875-Z102-3-7619