Table of Contents
Advertisement
Hardware Installation
– The operability of the safety mechanisms at the server e.g. stoppers or
holding back systems must be guaranteed.
– The form of the rack support uprights must ensure the frontal assembly of
the telescope rails.
– Frontally bolted telescopic rails or sliding rails.
The rails are provided with a linear alignment to ensure an adjustment to
different rack depths.
– No support of the cable management (delivered with the mounting kit).
– Climatic conditions.
For the air discharge ventilation of the installed server, ensure that in the rack
from front to rear the air flow is accessible.
In principle the ventilation concept plans that the necessary cooling is
reached by the horizontal self-ventilation of the installed devices (air flow
from the front to the rear).
– Power supply.
For the installation in 3rd-Party Racks it is to be made certain that appro-
priate socket strips are present.
A26361-K875-Z102-3-7619
Installing/Removing the Server into the Rack
27
Advertisement
Table of Contents
