Fujitsu PRIMERGY RX100 Operating Manual page 42

Installing/Removing the Server into the Rack
Removing occurs in reverse order:
V
CAUTION!
No cable management is available for the server!
Before removing the server from the rack, all cables connected on the
server must be unpluged from the sockets. Please note the instructions
in section "Installing/Removing the Server into the Rack" on page 23.
Figure 10: Removing the server
Ê Press in the safety springs (1) on both telescopic bars and carefully remove
the server from the rack (2).
36
Hardware Installation
A26361-K875-Z102-3-7619