Cleaning The Server - Fujitsu PRIMERGY RX100 Operating Manual

Preparation for Use/Operation
Installing the operating system
Ê Insert the installation disk and the CD of the operating system you want to
install.
Ê Reboot the server.
Ê Follow the instructions on the screen and in the manual for the operating
system.
If your server is equipped with a RAID controller, then please read how to install
the desired operating system in the related manual.
I
Please read also the Reference Manual Setup Utility D1483 (see also
"Related publications" on page 57).
5.4

Cleaning the Server

V
CAUTION!
Switch the server off, and pull the power plug out of the grounded-contact
power socket.
Do not clean any interior parts yourself; leave this job to a service
technician.
Do not use any cleaning agents that contain abrasives that may corrode
plastic.
Ensure that no liquid enters the system. Ensure that the ventilation areas
of the server and the monitor are free.
Use a cloth for disinfection to clean the keyboard and the mouse.
Wipe the server and monitor casing with a dry cloth. If particularly dirty, use a
cloth that has been moistened in a mild domestic detergent and then carefully
wrung out.
A26361-K875-Z102-3-7619
Cleaning the Server
49