Table of Contents
Advertisement
Preparation for Use/Operation
2
Global Error indicator (amber)
Does not light when the system is ok. No service incident or critical
event has occurred.
Flashes amber when a critical event has occurred. Users can check
BIOS Setup, system- and eventlog or via ServerView for event details.
The indicator also flashes in standby mode.
Lights amber when a prefailure event has been recognized. Users
can check system- and eventlog or via ServerView for event details.
The indicator also lights in standby mode.
If the event is still acute after a power failure, the indicator is activated
after the restart.
3
LAN indicators
Each LAN connector is equipped with a green and a yellow indicator.
These indicators are described in the technical manual for the system
board (see "Related publications" on page 57).
Table 4: Indicators on the rear
A26361-K875-Z102-3-7619
Operating and Indicator Elements
45
Advertisement
Table of Contents
